Oil and Gas2018-10-12T12:21:23+00:00

OIL AND GAS DEPT

Our Subsea insulation products and application services facilitate predictable flow assurance during production.
Increase your possibility for prolonged shutdown periods. “Rush-to-repair” or planned maintanance without the risk of hydrate formation and wax clogging.

Logo DOW

SUBSEA INSULATION

DOW Solid Silicone science for high operating temperature or “arctic low storage”
DOW hyperlast Polyurethane for medium operating temperature.

Information

HIGH TEMPERATURE – HIGH PRESSURE


<160°C Operating temp

Wet Application – Solid Silicone XTI-1003

• SI-O bond enabling Long term flexibility and UV resistance
• Resistant to Hydrostatic crush
• Cures at room temperature
• No exotherm nor shrinkage during cure
• Low temp cure
• Heat acceleration on demand
• Re-defines Wet Application as you know it
• < 3weeks lead time in Scandinavia
• < 3% waste

Halfshell – Solid Silicone XTI-1003

• Simple site modification of shell
• Supreme wetability
• < 3weeks lead time in Scandinavia
• Low mouldcost

Arctic Conditions

• Remains flexible at Joule – Thomson Effect
• Remains flexible at Arctic Storage
• Resists shock from arctic storage to subsea deployment

Please download our PDF file for DOW CORNING XTI-1003 or read our online flyer

PDF
Online flyer

Information

MEDIUM TEMP – HIGH PRESSURE


<80°C Operating temp

Wet Application – Solid Silicone XTI-1003

• Low thermal conductivity
• High impact resistance
• Easy processing
• Rapid cycle times
• Extensive Track Record

Wet Application – DOW Solid PU

• High flexibility
• High impact resistant
• High wear resistance
• Rapid cycle times
• Extensive Track Record

Halfshell – Syntactic or Solid DOW HYPERLAST PU

• Short leadtimes
• Extensive Track Record
• Easy processing

Please download our PDF file for HYPERLAST or read our online flyer

PDF
Online flyer

FAQ

What are the advantages of XTI-1003 over other materials on the market.2018-05-29T13:08:21+00:00

XTI-1003 being a solid silicone means that it is less prone to degradation in bulk compared to

What are maximum and minimum thicknesses that can be applied2018-05-29T13:09:04+00:00

There are no maximum thicknesses. Minimum wet applied is 1cm. Below we will use precasted sheets.

What kind of Structures/equipment is the XTI-1003 suitable for?2018-05-29T13:09:08+00:00

PLET, PLEM, FLET, XT, Manifold, VCCS, HCCS Jumper, Flowline, MPFM, Compressor

Can External equipment be mounted on/around the XTI-1003?2018-05-29T13:09:52+00:00

Yes, contact us for specific request

What is the temperature range of the XTI-10032018-05-29T13:09:59+00:00

The temperature range is from -68 to 155°C

Do you perform pull-off tests on site?2018-05-29T13:10:06+00:00

Yes, please contact us for details

What are the lead times on moulds?2018-05-29T13:10:13+00:00

Moulds are generated in-house or on site on demand. The lead time stretches from 1 day to 4 days pending complexity

Are there any limitations to what kind of geometry you can wet-apply to?2018-05-29T13:10:21+00:00

There are no restrictions in terms of geometry or size. Our mould technique and foregiving materials enable us to wet – apply all shapes and sizes maintaining the advantage wet application has over pre-casted insulation

We need to achieve a specific U-Value, can you calculate the thickness for us?2018-05-29T13:10:28+00:00

Yes, we are able to calculate the thickness required to achieve your U-Value

Do you operate outside Norway?2018-05-29T13:10:35+00:00

Yes, we operate globally utilizing our mobile units including a mouldmaking shop

Does your insulation meet the requirements of the API 17N TRL level 7?2018-05-29T13:10:43+00:00

Yes, please contact us for details

Does your insulation conform to the ISO 12736:2014?2018-05-29T13:10:50+00:00

Yes, please contact us for the qualification dossier

CASESTUDY

Lindberg & Lund -Oil & Gas Africa debut

Lindberg & Lund had its Africa debut Q1-2018 insulating a structure in Ghana for the OCTP project. The careful preparations and good cooperation with the Client and subsupplier secured a successful operation and a good start for the many international projects to come.

QUICKLINKS

CONTACT

Contact us

Do you have a question, please make contact

Contact

CASESTUDIES

to casestudies

More casestudies from Lindberg 6 Lund AS (only in Norwegian)

CASESTUDIES

THE TEAM

LARS MARTIN HAUGBERG
LARS MARTIN HAUGBERGDepartment Manager Oil & Gas
Direkte: +47 64 97 55 61
Mobil: +47 97 12 78 63
larsmartin@lindberg-lund.no
TERJE MORK
TERJE MORKProsjektingeniør
Direkte: +47 64 97 55 47
Mobil: +47 94 89 55 60
terje@lindberg-lund.no
STEFAN BOCHE
STEFAN BOCHEProject Manager
Direkte:+47 67 22 27 13
Mobil: +47 90 19 69 30
stefan@lindberg-lund.no

CONTACT US

VI BRUKER INFORMASJONSKAPSLER (COOKIES) SLIK AT VI KAN YTE DEG BEDRE SERVICE. INFORMASJONSKAPSLENE BLIR HOVEDSAKELIG BENYTTET FOR TRAFIKKMÅLING OG OPTIMALISERING AV TJENESTEN. DU KAN OGSÅ LESE MER OM VÅR BRUK AV INFORMASJONSKAPSLER HER Ok